The Nokia ACM2 is part of the Dynanet family of products and cards belonging to it can be sent to the MMX repair centre.  The ACM2 is an Access Multiplexer using PDH technology for 2048Kbps or 2 Mbps. This is the basic multiplex rate for PDH formed of 30 channels and in Europe has the designation E1.  It was used for both ISDN and also POTS ( plain old telephone service for telephone connections using copper to subscribers). Hence the main application was access to leased lines, POTS and into the local exchange. Management is via a system called Node Manager. The system is still in use for incumbent operators and transport. Nokia also produced a second generation under the Synfonet banner.

Nokia ACM2 Repair

Nokia ACM2 reference system in the MMX repair centre with Node Manger.

Example cards from Nokia ACM2 that can be repaired at our repair centre

 

Product Code Item Description
T30502.09 ACM2 Subrack 19 Inch, Non EMC
T30860.03 SPA Subrack Power Adapter, Twin Fused
T30502.09 ACM2 Subrack 19 Inch, Non EMC
T30705.03 ACM2 10 Channel Subscriber Interface Card
T30705.03 ACM2 10 CHANNEL CARD + PROG E 12/16KHZ (Nokia P/N: T30705.03)
P30900.02 ACM2 Mux Controller Unit (MCU) + Program E (Nokia P/N: T30700.02 / P30900.01)
T30701.01 ACM2 V5.1 Mux Controller Unit (MCU) & Program E, 75 Ohm
T30701.01A ACM2 V5.1 Mux Controller Unit (MCU) & Program E, 75 Ohm
T30700.02 ACM2 MCU Card [Release C3.0]
TT30700.02 ACM2 MCU Card Release 2.2
T30700.01 ACM2 Mux Controller Unit (MCU) [Release 1.4]
T30700.02 ACM2 Mux Controller Unit (MCU) + Program E
T30705.01 ACM2 Subs Card, High Power, 12/16kHz [10 Channel]
T30705.01 High Power ACM2
T307000.02 Mux CTL Unit (Fast)
TU21236.10 E&M 8 Channel Card (ACM2)
T30700.12 ACM2 Mux Controller Unit (MCU) + Program E, 120 Ohm
T30700.02 ACM2 Mux Controller Unit (MCU) + Program E (Nokia P/N: T30700.02 / P30900.01)
T30700.02.G10 ACM2 Mux Controller Unit (MCU) + Program E 75 Ohm
P30901.01 Mux CTL Unit (Fast)
P30956.01 ACM2 MCU Card [Release C3.0]
P30900.01 ACM2 Mux Controller Unit (MCU) + Program E

 

Our reference system is vital to the repair process since it is used to confirm proper and satisfactory function of the card after the repair has been carried out. It is also used before the repair takes place to diagnose the issue. Operators all over the world rely on our repair centre to ensure that the life of legacy equipment can be extended after manufacturer support has elapsed.  Contact us here for more information.

 

To discuss your needs for repair equipment belonging to the Nokia ACM2 system please contact us.

MMX has no formal affiliation with Nokia in relation to repair services.

 

Return to MMX repair capability page